NOTE: Suunto recommends that the battery cover and the O ring are changed simultaneously with the battery to ensure that the transmitter remains clean and water resistant. Careless battery replacement may void warranty.

To reduce the risk of fire or burns, do not crush, puncture or dispose of used batteries in fire or water. Only replace them with manufacturer-specified batteries. Recycle or dispose of used batteries properly. Heavy use of the backlight, especially in the Night Use setting, will significantly reduce battery life.

 

 

Make sure that you have purchased original Suunto battery kit (including battery and battery lid with O-ring installed) in order not to void warranty

In case you choose to buy batteries only (not complete original battery kit) the battery model is 2032.

When not using original Suunto battery kit we can not guarantee promised battery lifetime. Batteries that we in this case recommend are manufactured by Energizer and Sanyo

1. Insert a coin or battery opening tool into the slot located on the battery compartment cover on the backside of your Suunto t6.

2. Turn the coin counterclockwise until it is aligned with the open position marker.

3. Remove the battery compartment cover and the O-ring, and discard them

4. Remove the old battery carefully.

5. Clean the surfaces of battery compartment with soft cloth

6. Place the new battery into the battery compartment with the positive side facing up.Make sure to gently slide the battery underneath the contact plate on the side, ensuring that it does not break or bend out of place.

7. Replace the battery compartment cover and turn it with the coin clockwise until it is aligned with the close position marker.